No puedo hacer ping a mi mac que está ejecutando MacOS Big Sur 11.0.1 Parece que recibe los paquetes de ping pero no responde a ellos, y sí:
- El cortafuegos está desactivado
- He probado a activar y desactivar el modo oculto
- Incluso he reinstalado/restaurado el SO desde el modo recovery
- Ambos tienen la misma máscara de subred 255.255.255.0
Para comprobar si recibo algún paquete he corrido:
sudo tcpdump 'icmp[icmptype] = icmp-echo or icmp[icmptype] = icmp-echoreply' Cuando hago ping a la IP de ethernet desde mi router (192.168.0.1 / 95.XX.XX.168) obtengo lo siguiente:
tcpdump: data link type PKTAP
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on pktap, link-type PKTAP (Apple DLT_PKTAP), capture size 262144 bytes
01:16:56.067149 IP 95.XX.XX.168 > 192.168.0.52: ICMP echo request, id 25956, seq 0, length 72
01:16:57.074797 IP 95.XX.XX.168 > 192.168.0.52: ICMP echo request, id 25956, seq 1, length 72
01:16:58.084733 IP 95.XX.XX.168 > 192.168.0.52: ICMP echo request, id 25956, seq 2, length 72Desde el mismo router, puedo hacer ping a mi iPhone y éste responde.
PING 192.168.0.80 (192.168.0.80) from 95.XX.XX.168: 64 data bytes
72 bytes from 192.168.0.80: seq=0 ttl=64 time=120.000 ms
72 bytes from 192.168.0.80: seq=1 ttl=64 time=130.000 ms
72 bytes from 192.168.0.80: seq=2 ttl=64 time=40.000 ms
--- 192.168.0.80 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 40.000/96.666/130.000 msY puedo hacer ping a otras máquinas desde mi macbook, por ejemplo, mi iPhone:
ping -t 3 192.168.0.80
PING 192.168.0.80 (192.168.0.80): 56 data bytes
64 bytes from 192.168.0.80: icmp_seq=0 ttl=64 time=211.346 ms
64 bytes from 192.168.0.80: icmp_seq=1 ttl=64 time=961.203 ms
64 bytes from 192.168.0.80: icmp_seq=2 ttl=64 time=11.140 ms
--- 192.168.0.80 ping statistics ---
3 packets transmitted, 3 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 11.140/394.563/961.203/408.926 msY el tcpdump para ello:
01:28:03.524898 IP 192.168.0.52 > 192.168.0.80: ICMP echo request, id 1288, seq 0, length 64
01:28:03.736146 IP 192.168.0.80 > 192.168.0.52: ICMP echo reply, id 1288, seq 0, length 64
01:28:04.529410 IP 192.168.0.52 > 192.168.0.80: ICMP echo request, id 1288, seq 1, length 64
01:28:05.490506 IP 192.168.0.80 > 192.168.0.52: ICMP echo reply, id 1288, seq 1, length 64
01:28:05.529564 IP 192.168.0.52 > 192.168.0.80: ICMP echo request, id 1288, seq 2, length 64
01:28:05.540622 IP 192.168.0.80 > 192.168.0.52: ICMP echo reply, id 1288, seq 2, length 64Por otro lado, cuando hago ping a mi macbook desde mi iPhone:
PING 192.168.0.52 (192.168.0.52)
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
Request timeout for icmp_seq 3
Request timeout for icmp_seq 4
Request timeout for icmp_seq 5
Request timeout for icmp_seq 6
Request timeout for icmp_seq 7
--- 192.168.0.52 ping statistics ---
9 packets transmitted, 0 packets received, lost 100.0 %Pero el macbook parece recibirlos, sólo que no responde:
01:25:54.267776 IP 192.168.0.80 > 192.168.0.52: ICMP echo request, id 12, seq 0, length 24
01:25:56.269888 IP 192.168.0.80 > 192.168.0.52: ICMP echo request, id 12, seq 1, length 24
01:25:58.261587 IP 192.168.0.80 > 192.168.0.52: ICMP echo request, id 12, seq 2, length 24
01:26:00.270944 IP 192.168.0.80 > 192.168.0.52: ICMP echo request, id 12, seq 3, length 24
01:26:02.269110 IP 192.168.0.80 > 192.168.0.52: ICMP echo request, id 12, seq 4, length 24
01:26:04.266884 IP 192.168.0.80 > 192.168.0.52: ICMP echo request, id 12, seq 5, length 24
01:26:06.264448 IP 192.168.0.80 > 192.168.0.52: ICMP echo request, id 12, seq 6, length 24
01:26:08.266868 IP 192.168.0.80 > 192.168.0.52: ICMP echo request, id 12, seq 7, length 24
01:26:10.264863 IP 192.168.0.80 > 192.168.0.52: ICMP echo request, id 12, seq 8, length 24No parece haber ninguna regla de firewall en mi máquina después de ejecutar sudo pfctl -s all :
No ALTQ support in kernel
ALTQ related functions disabled
TRANSLATION RULES:
nat-anchor "com.apple/*" all
rdr-anchor "com.apple/*" all
FILTER RULES:
scrub-anchor "com.apple/*" all fragment reassemble
anchor "com.apple/*" all
DUMMYNET RULES:
dummynet-anchor "com.apple/*" all
INFO:
Status: Disabled Debug: Urgent
State Table Total Rate
current entries 0
searches 0 0.0/s
inserts 0 0.0/s
removals 0 0.0/s
Counters
match 0 0.0/s
bad-offset 0 0.0/s
fragment 0 0.0/s
short 0 0.0/s
normalize 0 0.0/s
memory 0 0.0/s
bad-timestamp 0 0.0/s
congestion 0 0.0/s
ip-option 0 0.0/s
proto-cksum 0 0.0/s
state-mismatch 0 0.0/s
state-insert 0 0.0/s
state-limit 0 0.0/s
src-limit 0 0.0/s
synproxy 0 0.0/s
dummynet 0 0.0/s
TIMEOUTS:
tcp.first 120s
tcp.opening 30s
tcp.established 86400s
tcp.closing 900s
tcp.finwait 45s
tcp.closed 90s
tcp.tsdiff 30s
udp.first 60s
udp.single 30s
udp.multiple 60s
icmp.first 20s
icmp.error 10s
grev1.first 120s
grev1.initiating 30s
grev1.estblished 1800s
esp.first 120s
esp.estblished 900s
other.first 60s
other.single 30s
other.multiple 60s
frag 30s
interval 10s
adaptive.start 6000 states
adaptive.end 12000 states
src.track 0s
LIMITS:
states hard limit 10000
app-states hard limit 10000
src-nodes hard limit 10000
frags hard limit 5000
tables hard limit 1000
table-entries hard limit 200000
OS FINGERPRINTS:
696 fingerprints loadedY mi ifconfig tiene este aspecto:
ifconfig -a
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
options=1203<RXCSUM,TXCSUM,TXSTATUS,SW_TIMESTAMP>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
nd6 options=201<PERFORMNUD,DAD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en5: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether ac:de:48:00:11:22
inet6 fe80::aede:48ff:fe00:1122%en5 prefixlen 64 scopeid 0x4
nd6 options=201<PERFORMNUD,DAD>
media: autoselect (100baseTX <full-duplex>)
status: active
ap1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
options=400<CHANNEL_IO>
ether 3a:f9:d3:83:18:e6
media: autoselect
status: inactive
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=400<CHANNEL_IO>
ether 38:f9:d3:83:18:e6
inet6 fe80::14f2:ebf3:1101:67bc%en0 prefixlen 64 secured scopeid 0x6
inet 192.168.0.124 netmask 0xffffff00 broadcast 192.168.0.255
nd6 options=201<PERFORMNUD,DAD>
media: autoselect
status: active
awdl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=400<CHANNEL_IO>
ether 7a:88:46:2c:f0:b2
inet6 fe80::7888:46ff:fe2c:f0b2%awdl0 prefixlen 64 scopeid 0x7
nd6 options=201<PERFORMNUD,DAD>
media: autoselect
status: active
llw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=400<CHANNEL_IO>
ether 7a:88:46:2c:f0:b2
inet6 fe80::7888:46ff:fe2c:f0b2%llw0 prefixlen 64 scopeid 0x8
nd6 options=201<PERFORMNUD,DAD>
media: autoselect
status: active
en3: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=460<TSO4,TSO6,CHANNEL_IO>
ether 82:53:be:a4:44:05
media: autoselect <full-duplex>
status: inactive
en4: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=460<TSO4,TSO6,CHANNEL_IO>
ether 82:53:be:a4:44:04
media: autoselect <full-duplex>
status: inactive
en1: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=460<TSO4,TSO6,CHANNEL_IO>
ether 82:53:be:a4:44:01
media: autoselect <full-duplex>
status: inactive
en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=460<TSO4,TSO6,CHANNEL_IO>
ether 82:53:be:a4:44:00
media: autoselect <full-duplex>
status: inactive
en7: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=6467<RXCSUM,TXCSUM,VLAN_MTU,TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM>
ether 48:65:ee:1d:59:23
inet6 fe80::1caa:45bf:3aec:20de%en7 prefixlen 64 secured scopeid 0xd
inet 192.168.0.52 netmask 0xffffff00 broadcast 192.168.0.255
nd6 options=201<PERFORMNUD,DAD>
media: autoselect (100baseTX <full-duplex>)
status: active
bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=63<RXCSUM,TXCSUM,TSO4,TSO6>
ether 82:53:be:a4:44:01
Configuration:
id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0
maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200
root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0
ipfilter disabled flags 0x0
member: en1 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 11 priority 0 path cost 0
member: en2 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 12 priority 0 path cost 0
member: en3 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 9 priority 0 path cost 0
member: en4 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 10 priority 0 path cost 0
nd6 options=201<PERFORMNUD,DAD>
media: <unknown type>
status: inactive
utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380
inet6 fe80::60fa:19f1:c750:5337%utun0 prefixlen 64 scopeid 0xf
nd6 options=201<PERFORMNUD,DAD>
utun1: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 2000
inet6 fe80::49fb:f35f:566c:6246%utun1 prefixlen 64 scopeid 0x10
nd6 options=201<PERFORMNUD,DAD>
pktap0: flags=1<UP> mtu 0
utun2: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380
inet6 fe80::7d94:7b40:79c1:a260%utun2 prefixlen 64 scopeid 0x12
nd6 options=201<PERFORMNUD,DAD>
utun3: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380
inet6 fe80::7e34:be6:af87:77b2%utun3 prefixlen 64 scopeid 0x13
nd6 options=201<PERFORMNUD,DAD>¿Alguna idea de lo que debería mirar? Gracias.
